How Plan and Profile Drawings Work

Later on y'all have used the Create View Frames wizard to create view frames, you can create sheets using the Create Sheets wizard.

You can specify whether the sheets are created in the electric current drawing or in one or more than new drawings.

Notation: If you choose to create sheets that display profile views, the profile views will exist created and placed in the drawing automatically in model space in the file containing the sheets.

Tutorial: Creating Sheets

1. Before you can use the Create Sheets sorcerer, create a view frame group using the Create View Frames wizard.
2. Click Output tab Plan Production panel Create Sheets Observe.

   Notation: On any page of this wizard, you can click Create Sheets to create the sheets using the default choices on the wizard pages. If a criteria that is needed that has not been supplied, so the Create Sheets button is non bachelor (grayed out). Yous can also click the links on the left side of the wizard to go directly to a sorcerer folio.

3. On the View Frame Group And Layouts page, select a view frame group from the list.

   Notation: Equally a reminder, the canvas type that was selected for this view frame group is displayed beneath the View Frame Grouping list.

4. For View Frame Range, all view frames are selected for processing by default, but you can choose a single view frame, or multiple view frames from the group past clicking Selection and then clicking the Choose View Frames button.
5. In the Layout Cosmos section, cull how the layouts will be created. A conceptual image on the right side of the magician page provides an indication of the result.

   Option	Description
   Number Of Layouts Per New Drawing (1)	This pick may be an appropriate selection if you lot programme to have several people working on individual sheets. When this option is selected, and you enter 1 for the value, one new layout (sail) is created in each new drawing. The full number of sheets and drawings depends on the length of the alignment selected and other criteria, such as the size of the viewports in the referenced template.
   Number Of Layouts Per New Drawing (>1)	If you cull this option and enter a value greater than one (3, for example), so 3 new layouts are created in each new drawing. The full number of sheets and drawings depends on the length of the alignment selected and other criteria, such as the size of the viewports in the referenced template.
   All Layouts In One New Cartoon	This option may be an appropriate option if having each private layout in a separate cartoon is not necessary for you, and if you have less than 10 sheets. Y'all may place all the layouts in one newly created cartoon. The total number of sheets depends on the length of the alignment selected and other criteria, such every bit the size of the viewports in the referenced template. For optimal results, it is recommended that you lot create no more 10 sheets per drawing. Therefore, this option may not be the best choice if you have more than 10 sheets.
   All Layouts In The Current Cartoon	If yous are generating less than 10 sheets, you may desire to generate the layouts in the current cartoon. The full number of sheets depends on the length of the alignment selected and other criteria, such every bit the size of the viewports in the referenced template. Note: For optimal results, it is recommended that you create no more than ten sheets per drawing. Therefore, this option may not be the best choice if you have more than 10 sheets.

6. Specify a proper name for the layouts or accept the default naming template.
7. Optionally, yous tin can utilize the Choose The North Arrow Block To Align In Layouts option to automatically align a northward pointer block in the canvass(s). Any blocks that be in the referenced template (.dwt) are displayed in the drop-downward list. If no blocks exist in the referenced template, the listing displays None. If you select a cake from this list, that block will be aligned to the north on the canvas(s).
8. Click Adjacent to display the Canvass Set page.
9. On the Sheet Ready page, in the Sheet Ready department, select either New Canvass Ready or Add To Existing Sheet Set.
10. In the Sheet Prepare Storage Location field, specify a location where the sheet set file (.dst) will be stored.
11. In the Sheets section, specify a storage location and proper name for the sheet file(s) that volition be created during this sorcerer session. If you have called to relieve all sheets in the current cartoon (the All Layouts In The Current Drawing choice on the Create Sheets wizard View Frame Group and Layouts page), these fields are not available (read only, grayed out).
12. Click Next to display the next page in the wizard sequence. If the view frames do not include whatsoever profile views, so the Contour Views page of the Create Sheets magician is not available, and the Data References folio is displayed side by side.
13. On the Profile Views page, you tin can specify additional settings for profile views. Notation that the profile view manner and the band set that were selected during view frame creation cannot be changed at this phase; withal, the electric current contour view manner and ring set that will be used are displayed as read-but on this page. Only boosted settings relating to contour views (Other Profile View Options) can be changed at this part of the process. For more than information, see Near Profile View Options for Plan Production.

    Note: If you need to alter these contour view or ring set up fashion settings, you must abolish out of the Create Sheets wizard and recreate the view frames, using the updated manner choices for the profile views and/or the ring sets.

14. In the Other Profile View Options department, you lot tin can get other settings from an existing profile view, or you can choose settings by launching the Profile View wizard at this indicate (from this folio of the Create Sheets wizard). If you lot choose to launch the Profile View wizard from the Create Sheets wizard, you will exist returned to the Profile Views page of the Create Sheets wizard when you are finished selecting contour view options.
15. If you are creating programme and contour sheets, you can choose how to align the data that is displayed in the plan and profile views using the Align Views options. If y'all are creating plan just or profile just sheets, these options are not available. These options are useful on projects that crave the data displayed in sheets to be aligned according to sure project requirements (such every bit aligned left, center, or correct).
    • Align Profile And Plan View At Offset: When this selection is selected, the left side (offset station) match line in the plan view aligns with the left side (start) of the profile view.
    • Align Profile And Plan View At Center: When this selection is selected, the heart of the plan view aligns with the center betoken of the profile view.
    • Align Profile And Plan View At Finish: When this option is selected, the right side (terminate station) friction match line in the plan view aligns with the right side (end) of the profile view.
16. Click Next to brandish the Information References page.

    Notation: The Information References page is not available if you chose All Layouts In The Current Cartoon in the Layout Cosmos section of the View Frame Group and Layout page.

17. On the Data References page, you tin select or omit the information you want to be included in your sheets. Select the check box adjacent to the data references you want displayed in the sheets. Some references cannot exist removed from the option, such as the alignment and profile associated with these sheets. If y'all are including pipe networks in the destination drawing(s), y'all may want to check the Copy Pipe Network Labels To Destination Drawings to also re-create the labels associated with any selected pipe networks.
18. Click Create Sheets to create the sheets.
19. If you lot selected to create sheets containing profile views, y'all are prompted to select an insertion indicate in model space to create the profile views. Click a location in the drawing (model infinite) to insert the profile views.

    Note: You volition only run into profile views in the current drawing if you selected the All Layouts in the Current Cartoon option in the Layout Creation section of the View Frame Grouping and Layout page.

Depending on your Event Managing director settings, Issue Managing director messages may inform you of the location of the canvas sets, besides equally the number of layouts created.

Once the sheets are created, the Sheet Fix Manager is displayed automatically, showing the newly created sheets in a sail gear up. For more than information about the Canvass Prepare Manager, come across the Sail Set Managing director Help topics in the AutoCAD Assistance.

peeblessoogniny1973.blogspot.com

Source: https://knowledge.autodesk.com/support/civil-3d/learn-explore/caas/CloudHelp/cloudhelp/2019/ENU/Civil3D-UserGuide/files/GUID-755FA485-8C22-4640-93E2-01498296E4E0-htm.html

Share this post